Anglewinder

We select brackets and supports for anglewinder setups with a focus on what truly matters on the track: alignment precision, proven materials, and compatibility with the most commonly used transmission groups in competition. Here you will find the specific component you are looking for, not just generic options.

Todos los productos Anglewinder

Out-of-Stock

Anglewinder

Anglewinder Evo Hard Motor Mount

Fabricante: Sideways

Ref: SWMAWEVOH

€7.73

The Sideways Anglewinder Evo Hard motor mount (ref. SWMAWEVOH) in red offers superior rigidity for angled installations, ensuring a clean transmission and precise motor positioning in your chassis.

View

TH-MTS002S - Soporte motor AW Extra Duro (Gris Oscuro) - Thunderslot

Anglewinder

Anglewinder Support

Fabricante: Thunder Slot

Ref: TH-MTS002S

€7.43

Anglewinder motor mount in extraduro version from Thunderslot (ref. TH-MTS002S), in dark grey. A part designed for those who do not accept compromises in the assembly and tuning of their slot cars.

Out-of-Stock

Anglewinder

Offset -0.70mm HARD Motor Mount

Fabricante: Sideways

Ref: SWMAWGT3-H

€6.53

The anglewinder motor mount from Sideways in DURO version with -0.70 mm offset allows fine-tuning of the drivetrain geometry to achieve a more predictable and direct response on the track. A small component with a significant impact on the car's behaviour.

View

Out-of-Stock

Anglewinder

Offset -0.70mm Motor Mount

Fabricante: Sideways

Ref: SWMAWGT

€7.73

The Anglewinder motor mount with -0.70mm offset from Sideways allows for precise adjustment of the motor position relative to the rear axle, fine-tuning the geometry of the assembly to maximise the performance of the drivetrain.

View

Soporte Motor AW RT3 Offset -0.50mm Extra-Hard (Rojo) de Scaleauto - SC-6536c

Anglewinder

AW RT3 Offset Motor Mount -0.50mm

Fabricante: Scaleauto

Ref: SC-6536C

€9.52

Scaleauto RT3 anglewinder motor mount with -0.50 mm offset in Extra-Hard (red) version. Designed for Scaleauto cars, it provides a firm and precise attachment to fine-tune the geometry of your drivetrain and extract every tenth on track.

SC-6531 - Soporte motor AW Rt4 Offset -0.75mm Ajustable

In Stock

Anglewinder

AW Rt4 Adjustable Motor Mount

Fabricante: Scaleauto

Ref: SC-6531

€12.72

Scaleauto Anglewinder RT-4 motor mount (SC-6531) with -0.75 mm offset and adjustable rear support for bearings with spherical bearings. A tuning part designed to get the most out of your Scaleauto GT on track.

SC-6529A - Soporte motor AW Rt4 Offset -0.75mm rodamientos SCALEAUTO

Out-of-Stock

Anglewinder

AW Rt4 Motor Mount Bearings

Fabricante: Scaleauto

Ref: SC-6529A

€12.32

Scaleauto RT-4 Anglewinder motor mount with -0.75 mm offset, specifically designed to accommodate bearings. A preparation component that makes a difference in the geometry of your slot car's rear end.

View

Anglewinder

Anglewinder Evo2 Blue long box motor mount

Fabricante: NSR

Ref: NSR1220

€5.50

The NSR Anglewinder Evo2 motor mount (ref. 1220) in blue and long box format provides the solid and precise base that any serious anglewinder setup requires. A reference piece in slot preparation for those who leave nothing to chance.

NSR1265 - Soporte motor sidewinder triangular extralight am

Anglewinder

Yellow transverse triangular cradle

Fabricante: NSR

Ref: NSR1265

€5.98

NSR yellow transverse triangular cradle, designed for sidewinder setups. Ultralight and precise, aimed at those seeking performance without adding unnecessary grams to the chassis.

Anglewinder

EVO Blue Triangular Stand

Fabricante: NSR

Ref: NSR1290

€5.87

NSR Blue EVO Triangular Chassis (NSR1290), soft High Gear Ratio version designed for gear ratios 8-39 to 9-36. A key preparation piece to optimise the transmission of your slot car with the characteristic reliability of NSR.

Anglewinder

Black EVO Triangular Chassis

Fabricante: NSR

Ref: NSR1291

€5.87

The NSR Black EVO Triangular Chassis (NSR1291) is designed to mount pinion/crown gear ratios between 8/39 and 9/36, providing a precise and stable fit to maximise the performance of your slot car in competition or tuning sessions.

In Stock

Anglewinder

White EVO Triangular Base

Fabricante: NSR

Ref: NSR1292

€5.87

The NSR White EVO Triangular Chassis (NSR1292) is designed for gear ratios between 8-39 and 9-36, providing a firm and precise mounting point to get the most out of your motor-axle assembly on track.

Anglewinder

Red EVO Triangular Stand

Fabricante: NSR

Ref: NSR1293

€6.05

NSR triangular EVO bench in red, reference NSR1293, compatible with gear ratios of 8-39 and 9-36. A key tuning component for those looking to adjust the mechanics of their chassis with the precision demanded by real competition.

Anglewinder

Adjustable hard angle cradle

Fabricante: Avant Slot

Ref: AV20561

€6.95

Anglewinder cradle made of hardened plastic with fiberglass for long can motors. Motor and rear axle in separate parts: perfect transmission with most pinions and crown gears on the market.

Anglewinder

Rally angle motor mount

Fabricante: Avant Slot

Ref: AV20519B

€2.95

Specifically designed to mount the motor in anglewinder configuration on Avant Slot rally chassis that do not accommodate an independent cradle. A precise and clean solution to prepare your car correctly.

Soporte motor triangular ángulo soft azul

Anglewinder

Blue soft angle triangular motor mount EVO

Fabricante: NSR

Ref: NSR1261

€5.20

The blue soft angle triangular motor mount EVO from NSR is a preparation part designed to optimise the motor installation and improve the response of the mechanical assembly on track. Manufactured with the precision that characterises NSR in its range of competition spare parts.

Cuna triangular para motor AW todas las durezas

Anglewinder

Yellow extralight triangular cradle for angled motor

Fabricante: NSR

Ref: NSR1260

€5.20

NSR triangular cradle for motor in anglewinder configuration, in extralight yellow. Designed to minimise weight without sacrificing rigidity, it is the choice of the most demanding tuners to fine-tune mass distribution in the chassis.

Soporte motor triangular ángulo evo duro blanco

Anglewinder

White hard evo angle triangular motor support

Fabricante: NSR

Ref: NSR1258

€5.68

NSR triangular motor mount (ref. NSR1258) in hard version and white colour, designed for anglewinder configuration. A key component for those seeking precision in assembly and consistency in the slot car's behaviour on the track.

Soporte motor triangular ángulo medio negro evo

Anglewinder

Black medium angle triangular motor support evo

Fabricante: NSR

Ref: NSR1257

€5.67

The medium angle triangular motor mount in black from NSR (NSR1257) is the key component for setting up an anglewinder drivetrain with the right geometry. Stiffness, precision, and compatibility with the NSR Evo range in a single component.

Anglewinder

Soft blue triangular angle motor support

Fabricante: NSR

Ref: NSR1256

€5.20

Precision and control in every corner: the NSR triangular motor mount in soft blue anglewinder configuration (ref. NSR1256) offers a firm installation and careful vibration absorption, designed for those looking to maximise the performance of their motor without sacrificing stability.

Soporte motor triangular ángulo medio negro

Out-of-Stock

Anglewinder

Black medium angle triangular motor mount

Fabricante: NSR

Ref: NSR1235

€5.50

Key component for anglewinder configurations: the medium angle black triangular motor mount from NSR provides precise and robust motor support, ensuring efficient transmission and stable performance on track.

View

Cuna triangular en linea todas las durezas

Anglewinder

Extra hard red line triangular cradle

Fabricante: NSR

Ref: NSR1254

€5.20

NSR triangular cradle in red hard plastic (NSR1254): the key component to securely mount the motor in inline configuration, reduce vibrations, and maintain the exact transmission geometry session after session.

Anglewinder

Triangular cradle in hard white line

Fabricante: NSR

Ref: NSR1253

€5.20

NSR triangular cradle in inline configuration, hard white finish. Designed to securely fix and align the motor precisely in NSR chassis, it is a key component in the preparation and tuning of your slot car.

In Stock

Anglewinder

Black medium line triangular cradle

Fabricante: NSR

Ref: NSR1252

€5.20

The NSR1252 triangular cradle in medium black inline configuration is the key component for securely mounting the motor inline with precision and stability in your slot chassis, ensuring consistent performance on track.

In Stock

Anglewinder

Soft blue inline triangular cradle

Fabricante: NSR

Ref: NSR1251

€5.20

NSR triangular cradle in inline configuration, in blue colour and soft version. Designed to precisely adjust the motor position and fine-tune the behaviour of your slot car according to the demands of each track.

Soporte motor triangular ángulo evo extraduro rojo

Anglewinder

Red extraduro evo angle triangular motor support

Fabricante: NSR

Ref: NSR1259

€5.56

Total rigidity where it matters most. The NSR triangular motor mount in anglewinder configuration, heavy-duty version in red, is designed for those seeking maximum control in the transmission and the highest consistency in performance lap after lap.

Anglewinder

AW EVO2 XHard Violet motor cradle

Fabricante: NSR

Ref: NSR1227

€5.49

The NSR Anglewinder EVO2 XHard Violet motor cradle takes the rigidity of the motor-transmission assembly to another level. Designed for those who push every tenth on track, it combines NSR's characteristic precision fit with extra hardness (XHard) that minimises flex and homogenises cornering behaviour.

Cuna para motor en AW EVO2 todas las durezas

Anglewinder

AW EVO2 Hard White motor cradle

Fabricante: NSR

Ref: NSR1226

€5.68

The Anglewinder EVO2 Hard White motor cradle (NSR1226) from NSR is designed to provide a rigid and precise hold of the motor in anglewinder configuration, ensuring consistent performance and effective transmission on track.

Anglewinder

EVO6 OFFSET 0.0mm angled bracket

Fabricante: SLOT.IT

Ref: SICH76

€6.95

EVO6 angled bracket with 0.0 mm offset from Slot.it, specifically designed for long can motors. Precise fit, solid construction, and the quality seal of one of the references in competition slot racing.

Anglewinder

EVO6 angled chassis 0.5mm OFFSET

Fabricante: SLOT.IT

Ref: SICH75

€6.95

EVO6 angled bracket with 0.5 mm OFFSET, specifically designed for long can motors. A precision piece for those looking to fine-tune the geometry of their chassis in competition.

Anglewinder

EVO6 angled bench 1.0mm OFFSET

Fabricante: SLOT.IT

Ref: SICH74

€6.95

EVO6 angled bracket with 1.0 mm OFFSET, designed for long can motors. A precision piece for those seeking an exact fit in the preparation of their slot chassis.

In Stock

Anglewinder

EVO 6 angled chassis

Fabricante: SLOT.IT

Ref: SICH61

€6.95

The Slot.it EVO 6 angled bracket is specifically designed for Boxer/Flat motors and is compatible with most chassis from the brand. A key component for those looking to fine-tune the anglewinder configuration of their slot car with guaranteed origin.

Anglewinder

AW EVO2 Medium Black motor cradle

Fabricante: NSR

Ref: NSR1225

€5.47

The NSR AW EVO2 Medium Black motor cradle is designed to house motors in an anglewinder configuration with maximum precision and rigidity. A key component for those looking to extract the best performance from their slot car setup.

Anglewinder

Yellow extralight triangular cradle for angled motor

Fabricante: NSR

Ref: NSR1255

€5.70

NSR triangular cradle (ref. NSR1255) for anglewinder configuration in extralight yellow. Designed to house the motor precisely and minimise weight, a key component in any serious setup.

In Stock

Anglewinder

Medium Angle Motor Support

Fabricante: Avant Slot

Ref: AV20525

€6.95

Medium hardness anglewinder motor mount designed for the latest generation speed chassis from Avant Slot. Compatible without modifications with the Lotus GT1, Porsche Kremer, and Mirage Gr.8 models.

Showing 73-107 of 107 item(s)